• Re-registering the remote control to the trolley

    If the remote control stops responding and the red light does not turn on, chances are that the batteries are empty.

    If the remote control stops responding, but the red light is on, the remote control needs to be registered again. This happens if you have not used the trolley for a while or if there has been an electrical fault.

    For the remote control with red buttons this goes as follows: All plugs out for 1 minute. Make sure the speed control on the trolley is fully turned back. Plugs in the trolley, switch on the trolley, switch on the remote control, press and hold the forward button on the remote control until the trolley starts to move. Do this for a maximum of 20 seconds. If it doesn't work, do the same thing again. Also not a success, just send an email to info@golfTed.eu


    For remote control with blue buttons this goes as follows: All plugs out for 1 minute. Make sure the speed control on the trolley is fully turned back. Plugs in the trolley but do not switch on the trolley yet. Turn remote control on and hold the forward button while turning on the trolley. The trolley should start driving within 3 seconds. If it doesn't work, do the same thing again. Also not a success, just send an email to info@golfTed.eu